XXX_er profile

the paint sounds good, I have never tried it 

but IME the problem with the brand of hair spray I used on a townie bike was the grip would slip when it got wet and grip again as it dried out and that residual product was still on the grip years later, I have since gone to using plain alcohol for  push on grips which completley dries out

but I like the double lock-ons most cuz the out side ring protects the end of my grip from tagging stuff/ tearing  and while riding on its side in the PU

Sure everything broke back then but Devinci beefed it up with a BIG  extra gusset, 

you don't normaly see big frame up grades like that unless something is not up to snuff

That Big Bang frame looks a lot like the FRD1 frame from > 20 yrs ago we had one which junior  broke completely in half, cuz it was still in warranty Devinci sent us a replacement which they had beefed up with an large extra gusset between the 2 main frame tubes at the headstock so i would guess a lot of those frames broke especaily the model that came stock with a Boxxer

" If life gives you lemons, make lemonade. "

From my recent Mexico trip i would suggest margarita's, 

also i forgot to pack shirts so a good reason  to buy surfer shirts 

always look on the bright side of life

all I gots is  cam straps and rope !

IME I can't put enough pressure on a cam strap to do tubeless instal so I use a loop of rope just bigger than the tire beed and I wind it tight on the tire tread  by turning with a wrench to make the loop smaller

but I havent had to do that ^^ with Maxxis tires cuz they inflate so easily with a shop pump

I'm a thin crust Pizza lover without pineapple, I hate soggy pizza and in general I find less is more, for less sog if you are making pizza try not putting anything in the middle and the topping will still migrate during the cooking process with no  sog- age

nice wheels, all things being equal I believe  a taller rim profile has more strength cuz of more arch ?

and pizza is always just pizza 

not pizza pie

actualy I don't see the E-bike articals ramping up more than usual, just the readers are no longer  acting like wankers which must mean they are becoming used to them, 

Sitting like a frog in a pot on the stove slowly being boiled to death as the heat gets turned up

I have a narrow heel/ wide forefoot so for clipless shoes its been the Specialized product usually on the closeout table cuz they didnt fit anyone but often bricks n mortar shops just don't stock shoes that are very small or very big and why would they stock shoes that don't sell,  ?

ski boots are also fun cuz mens sizes usually don't  go small enough and womens boots are too soft/ wrong shape

what does RC stand for ?

I want to love the Shimano product but they just don' fit me ( too roomy)  so I have given away 2 pair in SPD genre

In flats  I'm rocking  510's and 661 axo dualies which feel about the same 

its really hard to find  size 7 shoes, it took my local dealer  6 months of peeking on their website every so often

Posted by: three-sheets

What the fuck are 578 preschoolers doing in my blind spots on a road????

All the idiot sensors on my 150 would tell me they are there anyways.

Speaking of sensors, for our friend xxxr...a 150 tail light with blind spot sensors is 828 cad. I have 40 or so of this chassis in my fleet. If some dumbass paid 5 grand to fix his tail lights ( no relays btw, all drivers in the bcm) he is full of shit. They do get mud or ice build up in the light pocket, the fix is a 26 dollar pigtail connector.

apparently it was a highest end 2018 F-150 wtf that might mean, in any case first one of any procedure might take 4 hrs but then you know so we used to have a tech do all the engineering upgrades cuz it saved time to have somebody not re-invent the wheel learning the same shit, of course " assuming " stuff can still bite you on the ass, but what do i know

Youtube.com/watch?v=MUkFsuilVD0&t=1s

yeah thats all common knowledge so I  knew all that, its still gona be expensive fixing Aluminium if you gotta pay out of your own pocket

I think the price to fix an E f-150 might also suprise you cuz of the aluminium body

so there is an issue with moisture getting in the tail lights of f-150s corroding the connectors ect in general and parts prices are crazy

any body running the truck might wana splooge some dielectric grease in there after drying the housing out

a youtube is floating around where it costs a guy > 5000 $ to scope/ fix a tail-light issue on the premium model of 2018 F-150 cuz of special relays and stuff

Apparently if you use wheel washing facilites in mills or wtf it will fill the tail light up with water so the hot tip is to drill a SMALL hole in bottom of assembly to drain the water

I think you have to ask an RE agent cuz I believe the Assesments go on history ??

edit: sales history

i know some folks who came from a VERY hot market in Bend Oregon price in USA $ had tripled on them, so they didnt seem to care how much they paid or even getting jobs super quick

a Thing to consider is how much is the purchase price and it maybe a pretty low out-lay comparitively to where a purchaser might come from ?

I believe smithers has the highest prices up narth probably due to the amenities still my place has probably dropped 50-70K in a year or 2 , but I don't care,

JT is more than just well-coifed he also has the great suits and color-full socks

https://www.cbc.ca/news/canada/british-columbia/bc-assessment-property-values-2024-1.7072555

Most Values flattening

I just run whatever came on the bike, the newest bike i own came with WTB sti30 and they seem to work fine

I can legaly buy weed on main street with a visa card so I'm not sure its all that indicative of anything,

but T town is the home of the Christian heritage party so you can look on-line for which area voted for what party and that would be more indicative of the right wing thing

we already know they don't know how to use condoms cuz we can see all the anti abortion signs on the the way to telkwa

I hope they all got the narcan kits

the mayor of a small hard right christian town  12 kms east was busted for hard drugs so he had to resign, shortly there after he passed away at 56

That would be entirely political posturing which should placate the Canadian version of the maga